SHARE
Load Your Bakkie Like A Pro

Whether you use your own bakkie, or borrow one from a friend, loading the load box (also known as a tray or bed) properly is a matter of safety.

With the rise of modern bakkies, the days of overloading the old family station wagon gives way to a versatile vehicle that has the comfort and technology of a passenger car, plus all the benefits of a capable workhorse. Bakkies really come in handy when you need to move large or heavy items, from furniture to bricks, and you’d rather not deal with the hassle of towing a trailer.

Keong Yip, a senior technical engineer for the Ford Ranger and all-round packing guru, has seven expert tips that could save your precious cargo.

1.It’s all about the payload

The combined weight of the driver, passengers and cargo should never exceed your bakkie’s payload capacity however tempting it may be to add more when you see empty space. An overloaded load box may make it harder to stay in control and you’re at a higher risk of rollover.

2. Use a cover fitted for your load box

Bakkie beds come in different specs and dimensions. Instead of folding a tarp to fit your load box, invest in a properly fitted cover. Some come with elastic snaps that secure them, while others can be anchored with ratchet straps. Only use the recommended attachment points – don’t cut into the load box to make your own. If your load box comes with three sets of attachment points, always use the points at the front (closest to the cabin), plus at least the centre or rear points.

3. Learn to use that tech!

Modern bakkies are equipped with lots of high-end tech that can help you see better and drive more confidently; a reverse camera, for instance, can be very helpful when your cargo is stacked high. Also, get to know all the other semi-autonomous technologies under the hood.

4. Protect fragile loads with cling film

Think ahead! What does your trip to the hardware store involve? Wallpaper, carpets and wooden panels can easily flop around and get damaged on the way home. Luckily, you can find just the thing to protect them a few aisles down – pick up a roll of cling film and use it to wrap both ends of your haul.

5. Use netting for lighter items

Don’t let the appearance of small loads deceive you. Just because they fit comfortably in your load box doesn’t mean they will stay put. Secure lighter items, such as luggage, with custom-made and fitted nylon or polyester fibre cargo nets. The rot-and decay-resistant nets are light and can be easily stored.

6. Use ratchet straps for furniture and household items

When hauling large furniture or household items, try using ratchet straps made of strong synthetic fibre. Secure your straps to the piece of furniture itself, or crisscross on top to prevent movement in all directions.

7. Distribute weight evenly

Unlike furniture, construction material (such as gravel or sand) often allows for better weight distribution. An uneven weight distribution may make steering more difficult, so keep the heaviest loads as far forward and as low as possible. Keeping your payload forward or near you and the passenger helps prevent the front of your bakkie from becoming light and helps you stay in control, especially when it’s wet. 

A load is only secure when items can’t slide, fall onto the road or become airborne. These tips can help you think like an engineer, so you can get where you’re going with your load and nerves intact!

Source and image: Ford

Comments

SHARE
Previous article#Shoesday on Wednesday
Next articleGive Locs A Try